Transport welding carriage equipment for workshop

Transport welding carriage equipment for workshop

The powered transfer cart is suitable for various industries, steel mill, transfer steel products such as steel structure, steel pipe, steel billets, steel ladle and coil, etc from one location to another; Paper roll plant: transfer paper coil Painting shops: transfer workpiece into the painting room Sand blasting room Other industries: shipbuilding, quarries, warehouses and multi-bay workshops, etc

The principle of cart

The steel pipe transfer carts are powered by the cable reels. The powered transfer carts get power AC 380V through the device of cable reel which is installed at the bottom of the vehicle. The motor is controlled by the power through the AC control system. We use this principle to operate the vehicles, for example, start, stop, go forward and backward and so on. The operation system is low voltage 36V. The hydraulic lifting device can be installed on the transfer vehicles.If the running distance is more than 50m, a cable arranger needs to be installed to arrange the cable.

The technical parameters of KPJ cart

Model		KPJ-2t	KPJ-20t	KPJ-50t	KPJ-100t	KPJ-150t
Rated Load(t)		2	20	50	100	150
TableSize(mm)	Length(L)	2000	4000	5500	6500	10000
	Width(W)	1500	2200	2500	2800	3000
	Heigth(H)	500	600	700	1000	1200
Wheel Base(mm)		1200	2800	4200	4900	7000
Rail Inner Gauge(mm)		1200	1435	1435	2000	2000
Wheel Diameter(mm)		270	350	500	600	600
Wheel Quantity		4	4	4	4	8
Ground Clearance(mm)		50	50	50	75	75
Running Speed(min)		25	20	20	20	18
Motor Power(kw)		0.8	2.5	5.5	11	15
Running distance(m)		25	30	50	50	50
Max Wheel Load(KN)		14.4	77.7	174	343.8	265.2
Reference Weight(t)		2.5	5.6	7.8	14.1	26.2
Recommended Rail Model		P15	P24	P43	QU100	QU100

The details of cart

Other special transfer cart show

The cable reel powered cart manufacturing

After-sales service

Our commitment: The load bearing safety factor of the trolley is no less than 120%.

Freely design the auxiliary device or foundation drawing, and offer the technical service and drawing material.

16 hours engineering service and 24 hours internet service for our customers.

During the warranty period, if our products can't work normally, we can support you repair technology or replace relevant parts for you within 24 hours.

Solving the quality problem within 24 hours, serious attitude from beginning to end. Value the reputation and Preserve the image of our company.

A new type of self propelled trailer in BEFANBY company

A new type of self propelled trailer in BEFANBY company

A new product,self propelled trailer, came out in BEFANBY company after 14 years manufactured experience.It is finished in the 15th November, which has model of 4 wheels running on the rails, and other 4 wheels oriented, It is bilateral symmetrical.The guide wheels are installed in the leading truck,which is seated in the the head and the tail of self propelled trailer. The wheels running on the H type rails need to bear the loading force and pass it to the load.

The self propelled trailer is powered by the low voltage electricity from the rail.It conquers the problem of difficult to fast acceleration. The cart own the ability of adjustable fast acceleration and rail oriented traveling function. 

We all have a firmly believe that the self propelled trailer will be applied in the heavy industry workshop. And BEFANBY company will be the leading of self propelled trailer.

The energy conservation of bridge gantry crane

The energy conservation of bridge gantry crane 

Bridge gantry crane is an necessary equipment for the industry factory,which can affect the economy.but the development of crane is slow,and most of technology is import from oversea.The design style of bridge gantry crane is also old-fashioned in China. The economy & energy conservation is not payed attention.therefore, to evaluate the energy economy of crane takes an important to enterprise,even to China. The tendency to build a related laws and regulations.

In a word, to build a design quality, manufacturing technology, energy saving bridge gantry crane evaluation index system is the most important thing.

single overhead crane

BEFANBY company is a professional manufacturer of cranes,winches,hoists,and crane parts.

Here is a brief description of single girder overhead crane as following ;

Single girder overhead crane, also known as electric overhead crane, workstation bridge crane. It is designs consisting of main girder, end carriages, electric hoist and electric appliance. 

This kind of crane is top running crane. The driving mechanism is installed on the end carriages. It drives the whole overhead crane travelling along the runways.

The single girder overhead crane can be control by cab control or ground control. The ground control includes pendant control and remote control.

Main parts

End beam: The main parts of the beam includes motor, reducer, wheels and brake. It also equipped with safety device, such as bumper, limited switch. It drives the whole crane traveling along the workshop.

Main girder: The main girder is box girder structure, no deformation

Limited switch: Ensure the security during the crane traveling

Bumper: It can reduce the impact force when two cranes crash or the crane contact with rail baffle.

Hand hole: It is convenient to install and maintenance of crane.

Bolts: It is used to connect main girder and end beam.

Rails:The rails for hoist traveling is paved under the main girder with I-beam.

Green action plan in BEFANBY company

Green action plan in BEFANBY company

In the August, All foreign trade department moved to the new office, which located in the highest building in the city. It is a such beautiful place,clean and tidy..we all like the new environment very much. So the most important thing is to decorate it. And make it clean and tidy.

After discussed, the green action plan is put forward in the whole office. Which like a competition or a game. We buy a lot of green plant and must let it survive. Many ideas came out to plant the green plant to make the office more beautiful.

After the little game, we more like a big family,harmonious and Warm. I do believe our office will be more beautiful and BEFANBY company will go further.

My experience as a number of BEFANBY company

It is already 3 month since I came to BEFANBY company, Here is some experience I got from the 3 month,

1.To change the roles and adapt the new environment ASAP. 

We are member a the company and we should understand our identity . Of course, we are no longer a student, as a number a the company,we should be familiar with the company's rules and regulations, strengthen the discipline and to find their position in the company, On the other hand,we will increase experience .

2.Strive to cultivate the consciousness of loyalty, responsibility, bear hardships and stand hard work

On the first day I came to BEFANBY, I know that the loyalty is the most important thing in our life. We choose the company because we love this company, our company offers us not only the salary but also the a stage to display our talent, Therefore, we should with a grateful heart to work and increase experience .

3.To master your work ASAP

Accordingly, when you start from a new jobs, we should have the courage to start from scratch and determination,We need to simultaneously honor what we are taught and question it.To promote our ability.

Even though,I do not have a lot of experience in company ,I still believe that BEFANBY company will go further and I also will be show off your own talent.

The installation and testing for winch

The installation and testing for winch

1.When installing ,dismantling and moving the winch.It is necessary to kept stable and being not overly oblique without any clashes and fierce vibration.

2.Installation of winch

Its installation should be completed by professionals. The ground for installing the winch should be leveled off and much solid. The connection between winch and base should be reliable.

3.When mobile using ,fix the winch to timber sleepers block,and reliably and tightly connect timber block and chassis to ground anchor with steel wire rope . Be awake of avoiding looseness.

This installing method is suitable to winch being less than 3 tons.Concrete measurements for installation need to refer to such condition as soil quality,soil specific gravity and earth stamina,and are determined by ground anchor standard pictures appropriate to local use.

Some tips to keep cranes a long service life

Some tips to keep cranes a long service life

Everyone want the cranes to have a long service life after getting one, I share with you some tips during the crane operation. Hope it is useful for the crane users.

1.The first time to lift cargo ( or reached the max weight capacity),you need to put the cargo down, after lifting 0.5m, and then check the brake system. After confirmed no problem, you can work for the normal operation. 

2.The Operator need to run the alarm bell when something wrong.

3.It is necessary to follow the commanding signal during the operation.

4.When the power breakdown, it should turn the pendent on “0”, and check if it work normal when next time operation.

5.when the main hook and aux hook working together, it is necessary to prevent crash.

BEFANBY company hope the tips help you to keep the crane have  a long service life.

The features of electric chain hoist

The features of electric chain hoist

There are two types of electric hoist, one is wire rope electric hoist, and the other one is electric chain hoist. In BEFANBY company ,the electric chain hoist have a lot of advantages, Here I briefly talk about some details of electric chain hoist.

Electric chain hoist is a kind of efficient and versatile lifting tool, which is capable of being widely applied in factory, power plants, laboratory, transport and house for installing machines,  repairing, lifting goods and dragging and securing loads etc..

a.The Capacity from 500kg to 5000kg  b. Most tension safety hooks without break.

c.Compact and high efficient motor with heat protection device.

d.Push button is with 24v low voltage to guarantee safety.

e. Limit load device are fitted.

BEFANBY company can provide you not only good quality ,but also after sale service.

Welding rotator is shown on BEFANBY product list.

Welding rotator is shown on BEFANBY product list.

As more than 10 years developing ,BEFANBY company brings in new blood-welding rotator, here is some introduce about the welding rotator.

Welding rotator as advanced welding equipment, is used for pipe, containers, boilers, pressure vessels, oil tank and other cylinder’s assembling, burnishing and welding. It can use together with column and boom and SAW system to realize inside and outside girth and longitudinal welding. There are a lot of types welding rotator including self aligning rotators (SAR), and conventional rotators (WR). 

Accordingly this device has advantages of compact structure, small cubage, beautiful shape, lightweight, convenient operating and so on. The machine can assort all kinds of auto welding or manual welding, improving welding quality, lessening welding labor and improve productivity.

BEFANBY company not only support you best quality but also good services.

Nice day in the CHINA-EURASIA EXPO

On the sept.2-6, the fourth CHINA-EURASIA EXPO is hold in Urumchi, Sinkiang.

Our company, BEFANBY ,is also invited to take part in the EXPO, and we do have a lot of works to show our company to the world. This is the first days grand occasion.

There are a lot of visitors who from the whole world, they not only visit the EXPO, but also have a good view about China.See,so many people in the EXPO.

We have a deep discussion with our clients, and it is a happy day for all of us.

See our old friend also come here.

They all have a good time.

Hope can have a nice encounter with you in CHINA-EURASIA EXPO 

The safety rules during winch operation.

The safety rules during winch operation.

1.The voltage of motor should not exceed 5% of rated value.

2.Do not connect the breaking reversely,when to realize humping placement, please do not manually open the power-controlled brake controller.

3.During the winch working,the operator can not turn off the operating position.

4.Do not transform the winch by yourselves.

5.During operating the winch, the steel wire rope can not be dragged running on the ground, if necessary, install supporting roller or grooved roller. When still wire rope crosses driveways, protective device should be added so as to avoid persons treading on it and cars crushing on it.It is prohibited for people to cross the running steel wire rope or pass before the winch. Carrying workers on the site by the winch is not allowed.

6.During operation, operators should focus all their attentions on working and strictly follow the rules for operation, and under urgent and risky circumstances,immediately stop their operation against risk signals like crying and calling send out by any people.After making clear the situations, continue their operations.

The installation and testing for winch

1.When installing ,dismantling and moving the winch.It is necessary to kept stable and being not overly oblique without any clashes and fierce vibration.

2.Installation of winch

Its installation should be completed by professionals. The ground for installing the winch should be leveled off and much solid. The connection between winch and base should be reliable.

3.When mobile using ,fix the winch to timber sleepers block,and reliably and tightly connect timber block and chassis to ground anchor with steel wire rope . Be awake of avoiding looseness.

This installing method is suitable to winch being less than 3 tons.Concrete measurements for installation need to refer to such condition as soil quality,soil specific gravity and earth stamina,and are determined by ground anchor standard pictures appropriate to local use.

The brief introduction crane parts in BEFANBY

The brief introduction crane parts in BEFANBY

Xinxiang Hundred Percent Electrical And Mechanical Co., Ltd is a leading manufacturer of overhead cranes, gantry cranes,winches,hoists,transfer cars etc,in China.The crane parts are also important products in our company, Here is a brief introduction of crane parts in our company,

The crane booms and end trucks are the main components of a crane.In our products list they are also important parts.Then the crane wheels and steel rails occupy a large place in the crane parts,

Last week we have a big order of crane wheels, he used the crane wheels for the ship.and he sign a two years contract with us,the crane wheels is used in many industry,

However, the crane hooks and crane trolley are the other component of cranes, and they also can used in many industry,BEFANBY company not only can supply the overhead cranes,gantry cranes,but also can supply the crane parts.